System for HDI and substrate products  

The S-line is characterized by an outstanding test head technology. Linear motor drives in combination with ceramic air bearing gives the S2-8 plus and S2-16 plus the highest speed and accuracy. The testers are equipped with a dual shuttle system. One shuttle can be unload and load while the board in the second shuttle is tested, maximizing machine utilization.

 

 

---

KEY FEATURES

• Double shuttle system for fast loading and unloading of boards
• System for HDI and substrate products
• 15 µm pad size and 30 µm pitch8 test heads
• Max. test area 610mm x 310mm (24.0″ x 12.2″)
• 8 test heads
• Cameras with 3 µm resolution per pixel

---

MACHINE FEATURES

MECHANICS

• Max. Panelsize: 610mm x 330mm (24" x 13.0")
• Min Panelsize: 10mm x 10mm (0.4" x 0.4")
• Test area: 61mm0 x 310mm (24" x 12.2" )
• Board thickness: up to 2mm (0.32")
• 8 Test heads (4 top / 4 bottom)
• 4 Camera's (2 top / 2 bottom)
• Smallest Pad: 15µm * special setup
• Smallest Pitch: 30µm (1.2 mil)
• Resolution measurement system: ± 0.1µm (± 0.004 mil)
• Repeatable accuracy: ± 2µm (± 0.8 mil)
• Soft Touch Probes pressure: 5g to 10g
• Micro Needles Probes pressure: 0.3g to 2.5g

ELECTRONICS

• Continuity test: 1Ω - 10kΩ
• Isolation test:
  • Up to 25MΩ (FM) 
  • Up to 10GΩ (Ohmic)
  • MicroShort Detection®
• Test voltage: 100mV to 1000V
  
  

GENERAL CONNECTIONS

• Data input format: IPC-D-356A
• Network connection: Ethernet, TCP/IP
• Power Supply: 3x 400V, 50Hz (3x 208V, 60Hz), 1200VA
• Compressed air: 8 bar/115psi filtered
• Temperature: 18°C to 24°C
• Relative humidity: 40% to 60%
• Machine weight: 1550kg

---

OPTIONS 

• 4-wire Kelvin measurement with max. 300mA test current:
  
  • 0Ω to 1kΩ - Tolerance ± 2%, min. ± 25µΩ
  • with Kelvin probes contact pressure 0.3g to 2g
  • Smallest pad: 40µm (1.6 mil)*
  • Smallest pitch: 80µm ( 3.2 mil)*
  *with Kelvin probe fine adjustment
• Embedded Component test:
  •  R 0Ω - 1MΩ - Tolerance ± 1%, min. ± 0.5Ω | 1MΩ - 200MΩ - Tolerance ± 3% 
  • C 0F 100µF - Tolerance ± 2%, min. ± 30fF
  • L 0H to 10mH - Tolerance ± 5%, min. ± 0.25µH
• Diode/Varistor: U_F,U_R, U_BR 0V to 12.5V 
• Pneumatic clamping with supporting table for flexible boards
• Retest of faultfiles from external grid test systems on inquiry
• Repair software with barcode support

---

RELATED PRODUCTS 

      

 

 

 

---

All information subject to change without notice!

For more information, visit the website or send us your information request.