Special modular scrubbing application

• Working width : 640 mm
• Working height : 900 mm
• Operative conveyor speed : up to 2 m/min
• Min board thickness : 0,5 mm
• Max board thickness : 8 mm 
• Min board sizes : L. 300 x W. 250 mm 
• Max board sizes : L. infinite x W. 640 mm
• Pre-washing section : 4 couples of spraying manifolds
• High pressure water : 100 bar (2 Cat pumps)
• Power supply : 400 Volt 3phase – 50 Hz
• Control cabinet : separate

• Entering three position board alternator
• Automatic thickness control for brushes and back up rollers
• N. 4 counter-rollers, s.s. core covered with vulkolan
• N. 4 brushes (2 upper + 2 lower) Ø 150 mm with soft-start system
• Pre-washing section made-up of 4 couples of spraying manifolds and a s.s. low pressure pump (3 bar)
• High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply)
• Drying module consisting of 2 couples of air jet blowers fed by 2 turbines (5 HP/each) placed inside two wheeled sound-dampened boxes
• Transport rollers Ø 60 mm
• N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
• Omron PLC including a touch-screen
• Automatic brush wearing compensation
• Automatic dressing and foot-print cycles
• Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
• Economy system for water and power saving
• Pre-set programmes are available to reduce the setting time by the operator
• Separate control cabinet complete with connecting cables 5 m long (10 m. on request)

• centrifugal copper filter with additional s.s. tank and pump
• exit centering device

TECHNICAL DATA

• Working width : 640 mm
• Working height : 900 mm
• Operative conveyor speed : 2 m/min
• Min board thickness : 0,1 mm
• Max board thickness : 3,2 mm
• Min board sizes : L. 200 x W. 250 mm
• Min/max board sizes : L. infinite X W. 640 mm
• Ultrasonic cleaning
• High pressure water : 100 bar (2 Cat pumps)
• Power supply : 400 Volt 3phase – 50 Hz 
• Control cabinet : separate

• Entering three position board alternator    
• Automatic thickness control for brushes and back up rollers
• Special transport system for thin material treatment (PATENT PENDING) 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
• N. 4 counter-rollers, s.s. core covered with ceramic (for thin material) 
• N. 4 brushes (2 upper + 2 lower) Ø 125 mm
• Ultrasonic cleaning 
• High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply) 
• Drying module consisting of 1 couple of air jet blowers fed by 1 turbine (5 HP) placed inside a wheeled sound-proof box. 
• Transport rollers Ø 40 mm
• N. 4 frequency controllers for precise speed adjustment of the brushes
• N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
• N. 2 frequency controllers for adequate speed adjustment of the turbines in the drying section
• Omron PLC including a touch-screen (11” graphic type)
• Automatic brush wearing compensation
• Automatic dressing and foot-print cycles
• Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
• Economy system for water and power saving
• Pre-set programmes are available to reduce the setting time by the operator
• Separate control cabinet complete with connecting cables 5 m long (10 m. on request)

• centrifugal copper filter with additional s.s. tank and pump
• exit centering device

Special modular scrubbing application

• Working width : 640 mm
• Working height : 900 mm
• Operative conveyor speed : 2 m/min
• Min board thickness : 0,5 mm
• Max board thickness : 8 mm
• Min board sizes : L. 300 x W. 250 mm
• Max board sizes : L. infinite X W. 640 mm
• Ultrasonic cleaning
• High pressure water : 100 bar (2 Cat pumps)
• Power supply : 400 Volt 3phase – 50 Hz
• Control cabinet : separate

• Entry conveyor, 475 mm long 
• N. 4 counter-rollers, s.s. core covered with vulkolan
• N. 4 brushes (2 upper + 2 lower) Ø 150 mm with soft-start system
• Ultrasonic cleaning
• High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply)
• Drying module consisting of 2 couples of air jet blowers fed by 2 turbine (5 HP/each) placed inside two wheeled sound-dampened boxes
• Transport rollers Ø 60 mm
• Bargraph instrument for control of each brush abrasivity
• Manual brush adjustment with quote indicator for counter rollers
• Separate control cabinet complete with connecting cables 5 m long (10 m. on request)

• centrifugal copper filter with additional s.s. tank and pump
• Counter-rollers ceramic covered for min thickness 0,3 mm
• Standard guiding system for thin material 0,3 mm thickness

Unibloc body construction

• Working width: 640 mm
• Working height: 900 mm
• Operative conveyor speed: 2 m/min
• Min board thickness: 0,5 mm
• Max board thickness: 4 mm
• Min board sizes: L. 200 x W. 250 mm
• Max board sizes: L. infinite x W 640 mm
• Washing: 10 bar
• Power supply: 400 Volt 3phase – 50 Hz
• Control cabinet: built-in

MACHINE EQUIPPED WITH:

• Entering three position board alternator
• Automatic thickness control for brushes and back up rollers automatic adjustement
• N. 4 counter-rollers, s.s. core covered with vulkolan
• N. 4 brushes (2 upper + 2 lower) Ø 125 mm
• High pressure washing section at 10 bar (standard)
• Drying section consisting of 2 air jet blowers fed by 2 turbines (3 HP/each)
• Heated air section just at the exit which provides for complete dehumidification of the boards
• Transport rollers Ø 40 mm
• N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
• Omron PLC including a touch-screen
• Automatic brush wearing compensation
• Automatic dressing and foot-print cycles
• Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
• Economy system for water and power saving
• Built-in control cabinet

OPTIONS

• centrifugal copper filter with additional s.s. tank and pump
• exit centering device
• Counter-rollers ceramic covered (for Min thickness 0,3 mm)
• Standard guiding system for thin material 0,3 mm thickness
• Motorpump for 30 bar high pressure