Drillroom Equipment - Adeon Technologies

Slide background

Slide background

Slide background

AOI Systems

Overview Drillroom Equipment

Overview Drillroom Equipment

<

>

Drillstack Preparation

Pinning & Taping machine for stack preparation before the PCB drilling process. Executes simultaneously the pinning and taping operation on the shortest edges (pin edges) and with a second cycle only the taping on the longest edges.

Combi 22

NO

1

<

One Head De-Pinning machine

The stack with the pins is placed on the working table with the pins turned down and pushed against a sensor that activate automatically the expulsion cycle. Neither footswitch nor button is used. After the first pin expulsion the operator turns at 180° the stack for second pin expulsion.

Depinning Single

NO

2

>

Depinning Twin

The stack with the pins is placed on the working table with the pins turned down and inserted in the slot. Pushing longitudinally the stack the pins are automatically intercepted and ejected one after the other in two steps.

Depinning Twin

NO

3

<

Stack preparation before drilling process

Executes automatically and at the same time the pinning, taping and unloading (stacking) operations on the PCB panels ready to be drilled.

Octopus

NO

4

<

>

Semi automatic & manual...

...single head MLB Pinning machine. The ML boards are positioned on the working table and coinciding the holes on the centring pins. A footswitch activate the down stroke of the pinning head, the pin insertion and the return of the centering pin under the working table. When the pinned stack is unloaded the centring pin return up ready for the next cycle.

Pinning Single

NO

5

<

Working Process

The Multi Layer boards are positioned on the working table and coinciding the holes on the centring pins. The pinning heads down stroke, the pins insertion are activated from two buttons which must be pushed simultaneously. After the return of the centring pin under the working table is possible unload the pinned stack and the machine will be ready for the next cycle.

Pinning Twin

NO

6

<

>

Pinning machine...

...for stack preparation prior to drilling process. The boards are positioned on the working table against the position stops on the backside. The stack during the drilling process is held in position by two pressure feet. Two synchronized drilling heads positioned under the table coming up making the holes from the bottom.

Spinamatic

NO

7

<

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle. A carriage equipped with the taping device comes forward and terminate the operation.

Taping Single

NO

8

<

>

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle. A carriage equipped with two taping devices comes forward and terminate the operation putting two tapes each time.om.

Taping Twin

NO

9

<

Drillroom Equipment

Overview Drillroom Equipment

<

>

Drillstack Preparation

Pinning & Taping machine for stack preparation before the PCB drilling process. Executes simultaneously the pinning and taping operation on the shortest edges (pin edges) and with a second cycle only the taping on the longest edges.

Combi 22

NO

1

<

One Head De-Pinning machine

The stack with the pins is placed on the working table with the pins turned down and pushed against a sensor that activate automatically the expulsion cycle. Neither footswitch nor button is used. After the first pin expulsion the operator turns at 180° the stack for second pin expulsion.

Depinning Single

NO

2

>

Depinning Twin

The stack with the pins is placed on the working table with the pins turned down and inserted in the slot. Pushing longitudinally the stack the pins are automatically intercepted and ejected one after the other in two steps.

Depinning Twin

NO

3

<

Stack preparation before drilling process

Executes automatically and at the same time the pinning, taping and unloading (stacking) operations on the PCB panels ready to be drilled.

Octopus

NO

4

<

>

Semi automatic & manual...

...single head MLB Pinning machine. The ML boards are positioned on the working table and coinciding the holes on the centring pins. A footswitch activate the down stroke of the pinning head, the pin insertion and the return of the centering pin under the working table. When the pinned stack is unloaded the centring pin return up ready for the next cycle.

Pinning Single

NO

5

<

Working Process

The Multi Layer boards are positioned on the working table and coinciding the holes on the centring pins. The pinning heads down stroke, the pins insertion are activated from two buttons which must be pushed simultaneously. After the return of the centring pin under the working table is possible unload the pinned stack and the machine will be ready for the next cycle.

Pinning Twin

NO

6

<

>

Pinning machine...

...for stack preparation prior to drilling process. The boards are positioned on the working table against the position stops on the backside. The stack during the drilling process is held in position by two pressure feet. Two synchronized drilling heads positioned under the table coming up making the holes from the bottom.

Spinamatic

NO

7

<

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle. A carriage equipped with the taping device comes forward and terminate the operation.

Taping Single

NO

8

<

>

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle. A carriage equipped with two taping devices comes forward and terminate the operation putting two tapes each time.om.

Taping Twin

NO

9

<

Taping Single

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle.
A carriage equipped with the taping device comes forward and terminate the operation.

FEATURES MECHANICAL TAPING SINGLE MACHINE

Single and Double Spring load
Entry material on top
Table Top Model
Adjustable Tape Length on Entry Material
Variable Tape Width
Weight 31 lbs (14 kg)
Dimensions L 21,7” x D 11,8” x W 16,5” (550 x 300 x 420 mm)

FEATURES PNEUMATIC TAPING SINGLE MACHINE

Entry material on bottom
Table Top Model
Adjustable Tape Length on Entry Material
Variable Tape Width
Weight 55 lbs (25 kg)
Dimensions L 37,4” x D 13,4” x W 20,5” (950 x 340 x 520 mm)

RELATED PRODUCTS

All information subjected to change without notice!

For more information, visit the website or send us your information request.

Taping Twin

Working Cycle

The stack is placed on the plastic guides and pushed against the sensors that activate the cycle.
A carriage equipped with two taping devices comes forward and terminate the operation putting two tapes each time.

taping_twin

FEATURES MECHANICAL TAPING TWIN MACHINE

Single and Double Spring load
Entry material on top
Table Top Model or Column foot
Adjustable Tape Length on Entry Material
Variable Tape Width
Adjustable distance between Taping Heads
Weight 99 lbs (45 kg)
Dimensions L 33,5” x D 21,7” x W 21,7” (850 x 550 x 550 mm)

taping_twin_bottom

FEATURES PNEUMATIC TAPING TWIN MACHINE

Entry material on bottom
Adjustable Tape Length on Entry Material
Variable Tape Width
Weight 66 lbs (132 kg)
Dimensions L 29,5” x D 66,9” x W 53,1” (750 x 1700 x 1350 mm)

RELATED PRODUCTS

All information subjected to change without notice!

For more information, visit the website or send us your information request.

Spinamatic

Pinning machine for stack preparation prior to drilling process

Working cycle: The boards are positioned on the working table against the position stops on the backside. The stack during the drilling process is held in position by two pressure feet. Two synchronized drilling heads positioned under the table coming up making the holes from the bottom.

Two vibrators are connected by two pipes to the pressure feet that assure the pin feeding. After the drilling operation two pin drifts insert automatically the pins. The distance between holes/pins is adjustable without any restriction and the distance is readable by a digital counter as well as the stop position on the back (Y axis).

ADVANTAGES

Selectable for pinning only and/or drilling & pinning
Holes/pins distance and Y position stop with continuous regulation by hand wheels (easy measure reading by mechanical counters)
Hydraulic brakes for regular infeed (avoidance of burr on return feed)
Air pressure feeding group extremely accessible for inspection and cleaning

OPERATION

Drilling & Pinning simultaneously
Spindle/Cylinder positioning by Handwheel using accurate Mechanical Counters
Mechanical securing of Spindle/Cylinder position
Hydraulic Brakes for Z-Axis damping feed (fast approach, regular feed, no exit burr)
Automatic Pin Feed

MACHINE FEATURES

Max machine dimension: 1610 x 1500 x 750mm
Working area: 700 x 700m
Pins diameter: 3.00 - 3.175 - 4.00 - 5.00mm
Pin lengths: 18 - 20mm
Pin feeding: Automatic

WORKING CYCLES

Drilling – Pinning (D/S PCB)
Pinning – Taping (multilayers)
Taping

RELATED PRODUCTS

All information subjected to change without notice!

For more information, visit the website or send us your information request.

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.

Latest News

01 October 2021 ACB Group invests in new Flying Probe System
07 January 2021 CCI Eurolam SA acquires Adeon Technologies BV
10 November 2020 Exception PCB purchases Ledia Direct Imager

Upcoming events

Contact

Weidehek 26
Industrial Area Haagse Beemden # 4530
NL-4824 AS Breda
The Netherlands
Telephone: +31 (0)76 541 00 08
Fax: +31 (0)76 542 50 59
E-mail: info@adeon.nl