Slide background
Slide background
Slide background
    You are here:  
  1. Home
  2. Products
  3. AOI Systems
  4. Data Management
  5. EN
  6. Surface Treatment
  7. Brushing Equipment

AOI Systems

Unibloc 4/25/M/STR

Special modular scrubbing application

BASIC MODEL: 4/25/M – STR WITH ULTRASONIC MODULE AND 100 BAR WASHING
Stainless steel construction

TECHNICAL DATA

  • Working width : 640 mm
  • Working height : 900 mm
  • Operative conveyor speed : 2 m/min
  • Min board thickness : 0,5 mm
  • Max board thickness : 8 mm
  • Min board sizes : L. 300 x W. 250 mm
  • Max board sizes : L. infinite X W. 640 mm
  • Ultrasonic cleaning
  • High pressure water : 100 bar (2 Cat pumps)
  • Power supply : 400 Volt 3phase – 50 Hz
  • Control cabinet : separate

LINE EQUIPPED WITH :
  • Entry conveyor, 475 mm long
  • N. 4 counter-rollers, s.s. core covered with vulkolan
  • N. 4 brushes (2 upper + 2 lower) Ø 150 mm with soft-start system
  • Ultrasonic cleaning
  • High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply)
  • Drying module consisting of 2 couples of air jet blowers fed by 2 turbine (5 HP/each) placed inside two wheeled sound-dampened boxes
  • Transport rollers Ø 60 mm
  • Bargraph instrument for control of each brush abrasivity
  • Manual brush adjustment with quote indicator for counter rollers
  • Separate control cabinet complete with connecting cables 5 m long (10 m. on request)
OPTIONS
  • centrifugal copper filter with additional s.s. tank and pump
  • Counter-rollers ceramic covered for min thickness 0,3 mm
  • Standard guiding system for thin material 0,3 mm thickness

Unibloc 4/25/STR

Special modular scrubbing application

EXAMPLE OF AN AUTOMATIC VERSION: 4/25/STR WITH PRE-WASHING AND 100 BAR WASHING
Stainless steel construction

 

TECHNICAL DATA

  • Working width : 640 mm
  • Working height : 900 mm
  • Operative conveyor speed : up to 2 m/min
  • Min board thickness : 0,5 mm
  • Max board thickness : 8 mm 
  • Min board sizes : L. 300 x W. 250 mm 
  • Max board sizes : L. infinite x W. 640 mm
  • Pre-washing section : 4 couples of spraying manifolds
  • High pressure water : 100 bar (2 Cat pumps)
  • Power supply : 400 Volt 3phase – 50 Hz
  • Control cabinet : separate
LINE EQUIPPED WITH:
  • Entering three position board alternator
  • Automatic thickness control for brushes and back up rollers
  • N. 4 counter-rollers, s.s. core covered with vulkolan
  • N. 4 brushes (2 upper + 2 lower) Ø 150 mm with soft-start system
  • Pre-washing section made-up of 4 couples of spraying manifolds and a s.s. low pressure pump (3 bar)
  • High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply)
  • Drying module consisting of 2 couples of air jet blowers fed by 2 turbines (5 HP/each) placed inside two wheeled sound-dampened boxes
  • Transport rollers Ø 60 mm
  • N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
  • Omron PLC including a touch-screen
  • Automatic brush wearing compensation
  • Automatic dressing and foot-print cycles
  • Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
  • Economy system for water and power saving
  • Pre-set programmes are available to reduce the setting time by the operator
  • Separate control cabinet complete with connecting cables 5 m long (10 m. on request)
OPTIONS
  • centrifugal copper filter with additional s.s. tank and pump
  • exit centering device

 

Unibloc 4/25/FAS

unibloc 4-25


FOR THIN MATERIAL
WITH ULTRASONIC MODULE AND 100 BAR WASHING
Stainless steel construction

TECHNICAL DATA

  • Working width : 640 mm
  • Working height : 900 mm
  • Operative conveyor speed : 2 m/min
  • Min board thickness : 0,1 mm
  • Max board thickness : 3,2 mm
  • Min board sizes : L. 200 x W. 250 mm
  • Min/max board sizes : L. infinite X W. 640 mm
  • Ultrasonic cleaning
  • High pressure water : 100 bar (2 Cat pumps)
  • Power supply : 400 Volt 3phase – 50 Hz 
  • Control cabinet : separate
LINE EQUIPPED WITH :
  • Entering three position board alternator    
  • Automatic thickness control for brushes and back up rollers
  • Special transport system for thin material treatment (PATENT PENDING) 


















  • N. 4 counter-rollers, s.s. core covered with ceramic (for thin material) 
  • N. 4 brushes (2 upper + 2 lower) Ø 125 mm
  • Ultrasonic cleaning 
  • High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply) 
  • Drying module consisting of 1 couple of air jet blowers fed by 1 turbine (5 HP) placed inside a wheeled sound-proof box. 
  • Transport rollers Ø 40 mm
  • N. 4 frequency controllers for precise speed adjustment of the brushes
  • N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
  • N. 2 frequency controllers for adequate speed adjustment of the turbines in the drying section
  • Omron PLC including a touch-screen (11” graphic type)
  • Automatic brush wearing compensation
  • Automatic dressing and foot-print cycles
  • Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
  • Economy system for water and power saving
  • Pre-set programmes are available to reduce the setting time by the operator
  • Separate control cabinet complete with connecting cables 5 m long (10 m. on request)
OPTIONS
  • centrifugal copper filter with additional s.s. tank and pump
  • exit centering device

Unibloc 4/25/M

Special modular scrubbing application unibloc 4/25/m

BASIC MODEL: 4/25/M – STR WITH ULTRASONIC MODULE AND 100 BAR WASHING
Stainless steel construction

TECHNICAL DATA

  • Working width : 640 mm
  • Working height : 900 mm
  • Operative conveyor speed : 2 m/min
  • Min board thickness : 0,5 mm
  • Max board thickness : 8 mm
  • Min board sizes : L. 300 x W. 250 mm
  • Max board sizes : L. infinite X W. 640 mm
  • Ultrasonic cleaning
  • High pressure water : 100 bar (2 Cat pumps)
  • Power supply : 400 Volt 3phase – 50 Hz
  • Control cabinet : separate

LINE EQUIPPED WITH :
  • Entry conveyor, 475 mm long 
  • N. 4 counter-rollers, s.s. core covered with vulkolan
  • N. 4 brushes (2 upper + 2 lower) Ø 150 mm with soft-start system unibloc 4/25/m
  • Ultrasonic cleaning
  • High pressure water section at 100 bar with 2 CAT pumps – 30 l/min each (7,5 Hp motor for 50 Hz supply or 10 Hp motor for 60 Hz supply)
  • Drying module consisting of 2 couples of air jet blowers fed by 2 turbine (5 HP/each) placed inside two wheeled sound-dampened boxes
  • Transport rollers Ø 60 mm
  • Bargraph instrument for control of each brush abrasivity
  • Manual brush adjustment with quote indicator for counter rollers
  • Separate control cabinet complete with connecting cables 5 m long (10 m. on request)
OPTIONS
  • centrifugal copper filter with additional s.s. tank and pump
  • Counter-rollers ceramic covered for min thickness 0,3 mm
  • Standard guiding system for thin material 0,3 mm thickness

Unibloc 4/25/FA

Unibloc body construction

unibloc 4-25

Example of an automatic version: 4/25/FA
Stainless steel construction
 
This compact unit, when fitted with suitable brushes, can perform the most various surface treatments: deburring, scrubbing, mechanical cleaning before photo process.
Unibloc can also provide for excellent cleaning of the s.s. plates for M/L press: for better performance it can be fitted with brushes of ø 150 mm (in place of the usual ø 125 mm). The unibloc different models can match the most different needs of conventional and state-of-the-art PCB’s fabrication process.
 
TECHNICAL DATA
  • Working width: 640 mm
  • Working height: 900 mm
  • Operative conveyor speed: 2 m/min
  • Min board thickness: 0,5 mm
  • Max board thickness: 4 mm
  • Min board sizes: L. 200 x W. 250 mm
  • Max board sizes: L. infinite x W 640 mm
  • Washing: 10 bar
  • Power supply: 400 Volt 3phase – 50 Hz
  • Control cabinet: built-in

MACHINE EQUIPPED WITH:

  • Entering three position board alternator
  • Automatic thickness control for brushes and back up rollers automatic adjustement
  • N. 4 counter-rollers, s.s. core covered with vulkolan
  • N. 4 brushes (2 upper + 2 lower) Ø 125 mm
  • High pressure washing section at 10 bar (standard)
  • Drying section consisting of 2 air jet blowers fed by 2 turbines (3 HP/each)
  • Heated air section just at the exit which provides for complete dehumidification of the boards
  • Transport rollers Ø 40 mm
  • N. 6 frequency controllers for automatic adjustment of brushes and counter-rollers
  • Omron PLC including a touch-screen
  • Automatic brush wearing compensation
  • Automatic dressing and foot-print cycles
  • Auto-zeroing cycle for resetting precisely the reference position of brushes and counter-rollers
  • Economy system for water and power saving
  • Built-in control cabinet

OPTIONS

  • centrifugal copper filter with additional s.s. tank and pump
  • exit centering device
  • Counter-rollers ceramic covered (for Min thickness 0,3 mm)
  • Standard guiding system for thin material 0,3 mm thickness
  • Motorpump for 30 bar high pressure
  1. Unibloc 2/25M
  2. Planarizer Model 650
  3. Special Modular Scrubbing

Information request

Please type your full name.
Invalid email address.
Please send us your message.
Invalid Input

About Adeon

At Adeon we believe that it is the quality of our work that placed us in our current position, and quality is what we try to improve with everything we do. European PCB manufacturers are often challenged to produce many different designs and technology levels every day. This makes it challenging to select and provide equipment that is capable of doing that. Our goal is to offer the best service and support against affordable rates to the highest standards to help our customers to stay at the forefront of technological developments.

Latest News

Upcoming events