Dust Removal System

Our Dust Removal System is the ultimate tool for cleaning particulate contaminants. Unwanted particles as small as one micron are readily removed from the substrate. High tack (BLUE) is use on rigid, thicker substrates such as copper panels. Medium tack (RED) is used on substrates such as flex circuits, photo tools, artwork and glass. Medium tack general purpose (LIGHT BLUE) is appropriate for all the substrates mentioned above in the medium tack level with special emphasis on cleaning thin or delicate substrates.
The 6" and 12" DRS handles are available in metal and plastic, and all sizes have a straight or 30 degree handle. Custom sizes and configurations available on request.

DRS CLEANING PADS DRS-1 

Made of a 240mm x 330mm (9.5" x 13") Tacky Pad with 50 easy peel away disposable sheets. Each Tacky Pad sheet is coated with a specially formulated adhesive that will not transfer to the roller. Each pad has holes on the upper edge for ease in mounting on the DRS-4 pad holderhome rollers.

DRS CLEANING PAD HOLDERS DRS-4

The tray is designed to hold the DRS-1 pad and only the DRS-6 or DRS-12 Hand Roller. The tray enables you to utilize the DUST REMOVAL SYSTEM and keep an organized work station.
Vertically mountable DRS Cleaning Pad & Roller Holders now available.

DRS HAND ROLLERS DRS-3, 6, 12 OR 18 

Choice between 4 different widths:

• 76mm (3")
• 152mm ("6")
• 305mm (12")
• 457mm (18")
  Hand Held Tacky Roller with a range of ergonomically designed handles available
  These rollers are designed to lift dust, chips and microscopic contaminates and transfer them to the DRS-1 pad
  The specially formulated coating will not leave any residue

Choice between 3 different Handle Types:

• Straight Handle Aluminium - FA
• 30º Angle Handle Aluminium - FB
• 30º Angle Handle Plastic - BP
  

Different Tack Levels:

All information subjected to change without notice!

For more information, visit the website or send us your information request.

SDI makes Adhesive Rolls for any model of contact cleaner.

As the world’s largest independent manufacturer of contact cleaning machines and their associated consumables, SDI is ideally placed to advise on they sizes, types and formulations of Adhesive Rolls to give the maximum yield improvement for your dustcritical process.

State-of-the-art conversion facilities mean that SDI can supply odd-size rolls.

We also supply our Adhesive Rolls pre-sheeted — using an advanced technique that ensures 10% more sheets per roll than our competitors.

FEATURES

• Silicon-based or Silicon Free formulations
• Continuous or Pre-Sheeted Rolls
• Range of Tack Levels and Core Sizes
• Rigid Cores for stability at high speed and
  straightness across full width for perfect contact
• Rolls for other brands of machines

STANDARD AVAILABLE SIZES - SILICON & SILICON FREE 

• AR-10.0 - 254mm (10.0")
• AR-12.0 - 305mm (12")
• AR-13.6 - 345mm (13.6")
• AR-16.0 - 406mm (16")
• AR-24.0 -  610mm (24.0")
• AR-24.5 -  622mm (24.5")
• AR-25.6 -  650mm (25.6")
• AR-30.0 - 762mm (30")

All sizes and types can be supplied as Sheeted & Non-Sheeted.
SDI Europe offers a "In House Cutting Facility" to cut to any size width you require. (optional)

VARIATIONS

Continuous or Pre-Sheeted?

Traditionally, Adhesive Rolls were supplied in continuous form, requiring the machine operator to cut the used portion away with a sharp blade. Though these rolls are inexpensive, there is the likelihood that the operator will remove more than is necessary, and use of a blade near to the critical polymer rollers can prove to be expensive should the operator be careless.

SDI offer pre-sheeted rolls using an advanced converting method that gives 10% more sheets per roll than our competitors. Rather than each sheet being the same length (and thus progressively wasting more and more of the roll as its circumference diminishes through use), SDI sheets are each slightly shorter than the last, giving the maximum use from the roll.

Silicone or Silicone Free?

The majority of adhesive rolls are paper-based with a silicone release liner. These rolls are available in Standard Tack and High Tack, and must only be used with silicone based polymer rollers.

Silicone-free rolls are available for applications where all silicone products are banned from the work environment. These are plastic-based rolls with no release liner, and are available in Standard Tack only. These must be used with silicone-free polymer rolls.

Standard Tack or High Tack?

Paper based rolls (with silicone release liner) can have extra adhesive to give a higher contamination reservoir. High Tack rolls are recommended for the SMT and Narrow Web (flexo printing) industry.

All information subjected to change without notice!

For more information, visit the website or send us your information request.

Dust-Tak tacky cleaning wipes are the practical alternative to blowing, vacuuming, or wet wiping.
Dust-Tak 'White' (white in color) and Dust-Tak 'Gold' (light yellow in color) each have their own unique different levels of treatments: LOW, MEDIUM, and HIGH. All designed to retain unwanted dust particles and contaminates.

Available products

• DT1 Bulk cut sheet 9" x 18" (228mm x 557mm)
• DT2 Rolls - 9" x 150 yards (288mm x 137 meters)
• DT3 Rolls - 9" x 250 yds. (228mm x 229 meter)

For more information, visit the website or send us your information request.